Russia case for smart home automation DIY by KinCony IoT products

Thanks for our Russia friend to share the video for his home. He have explained all details, as follows:

I will show you what kind of automation I was able to implement in my house based on Kincony controllers. Here you see kc868 lan There are 2 types. One with wi fi control, the other with Lan control.

Next, we see a radio module that controls this relay via radio consoles. their range depends on the installation location of the radio module with antennas and on the power of the remote control. I have not checked the range, but I think it will be over 100 meters, although the declared range is even greater.

you can also register any remote controls for 433 megahertz. this remote also works, it controls the first two relays. if you hold the button on the radio module and then hold the button on the remote control, the remote control will be added.

There is a keyboard for controlling this relay by pressing keys on the keyboard, you can close the corresponding relay. next programmable controller kc 868 COL with temperature sensors and the ability to connect other sensors and actuators. on the computer screen, you can see the readings of the temperature sensors. in this program, you can configure the script for the operation of actuators, depending on the readings of the sensors. the laptop, like the controllers, is located in the home Ethernet network with Internet access. The program connects to the controller via an ip address. For example, if at 20 ° C you need to shut off the water, you can use a similar motor for the valve.

door sensors and a fire alarm are also connected to the controller. when I open the door, I receive a notification about this on my phone. you can also set up a script that will be executed by the controller when any input is closed.
For example, when a door is opened, a light may turn on. above all, it can be controlled using such a module to work with the google home application. Voice commands can be given using the phone through the voice assistant and using the «nest mini» smart speaker. Setting up all this is not difficult.

Various video instructions are available at kincony.Com. There are also modules for working with Alexa.

On the site you can also find video-instructions on how to set up control through the Siri»apple. As for the control via google home, I additionally bought such a column, it is purchased separately.

This is how it works. "Ok google ..." at the moment the relays corresponding to the lights are closed. I have a lantern installed on the street, it lit up. In that box are power relays that control 220 volts to power the lights. The control voltage is 12 volts.

All devices here operate from 12 volts. And there is a separate high voltage.

"Ok google ..." It looks like it was a problem with my pronunciation. Russification of the nest mini column is a separate conversation.

There are video tutorials on the Internet. Everything is controlled from the phone in Russian without any problems. Ask the seller and kincony engineer questions about your difficulties.

You can contact me by e-mail vzktor@mail.ru. Thanks!